View CSTNE16M0V53C000B0_9116806.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 1 / 19 u? ? specification of piezoelectric ceramic resonator Q issue date : january 5, 2018 1. ? part number ? ?`?? ? 2. m scope u? ?? ?d ???`??k?????k ? ? ??????????????Bj this product specification is applied to the piezoelectric ceramic resonator used for time base oscillator in a m icrocomputer for automotive application . please contact us when using this product for any other applications than described in the above. 3. Q appearance and dimensions 3 - 1 Q : ??????Re???A?? appearance : no illegible marking. no visi ble dirt. 3 - 2 ? ? ? : u?g? ? 6 ?? dimensions of component : please refer to item 6 for component d imensions. 3 - 3 : ????R????? ?w???? construction : resonator element is mounted onto capacitor substrate, then metal cap covers over the el e ments. 4. rating ? ? ?? ?? ???R ? ?R
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 2 / 19 5. ?? electrical characteristics ? ? ?k? k?S? k?? ? ??k??? k?` ?? ? i 1mhz ? A ~F? g ??r ? ? ?????A ? 0.60% ???? terminal (1) and (3) are interchangeable, but if interchange initial tolerance is 0.60% max. *2 k ??? y ? 9 ? please refer to item 9 for measuring method of oscillating frequency and r esonant i mpe d ance. *3 ? +852 1000 rg? ? 1 rgy? component shall be left in a chamber at +85 ? 2c for 1000 hours, then measured after leaving at room temperature for 1 hour.
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 3 / 19 6. ? dimensions w : 3.20 ?? u? ? ` g : mm in mm u? eiaj monthly code ? ???? (note) the number is cycled by 4years. month year 1 2 3 4 5 6 7 8 9 10 11 12 2011, 2015, 2019 , 2023 a b c d e f g h j k l m 2012, 2016, 2020 , 2024 n p q r s t u v w x y z 2013, 2017, 2021 , 2025 2014, 2018, 2022 , 2026 ?? w l 1.20.1 0.50(ref.) 0.50(ref.) 1.20.1 3.0max. 0.100.10 0.40.1 0.40.1 0.40.1 (1) (2) (3) 0.40.1 0.10.1 1.1max. 0.40.1 t 0.50(ref.) 0.4 1.9 0.4 0.4 0.8 (recommendable land pattern) (?X?) 0.8 1.2 1.2
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 4 / 19 7. ??? packaging standard (bulk) ?gu? 500 ??? ?????? each minimum package unit of components (500 pcs) shall be in a carton box and it shall be clearly marked with part number, quantity and outgoing inspection number. 8. ?`???? packaging standard (taping) 8 - 1 di mensions of taping 8 - 1 - 1 u????Y????????? 6 ? the direction of component shall be fixed as shown in above dimensions. please refer to item 6 for the terminal number. 8 - 1 - 2 `?`? 170 ? ??? 0.1 0.7n ?? the p eel strength of cover film shall be 0.1 to 0.7n (reference) which measured at 170 degrees with respect to the carrier tape. 2.00.05 4.00.1 1.0 +0.2 -0.0 (5) 3.40 3.50.05 8.00.2 1.750.1 0.250.05 10 ? `?` g mm ? ?` 300mm / (5.2) cover film direction of feed the cover film peel strength force the cover film peel speed 300mm/min. in mm 4.00.1 0.10.7n 0.1 to 0.7n 1.50 b (3) (2) (1) 1.5 +0.1 -0.0 (1.40max) +0.10 -0.05 +0.10 -0.05 1.100.1
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 5 / 19 8 - 2 `? dimension s of reel 8 - 2 - 1 ?`?? ?`????r?????? ?? the tape for components shall be wound clockwise. the feeding holes shall be to the right side as the tape is pulled toward the user. 8 - 2 - 2 ?``? 16 0 190mm ` ` ? 160 mm u? ????O `` ?`?Lu??????? 400 560mm O? no component shall exist in trailer area of 160 to 190mm and i n leader area of 160mm min. at the tip of the tape. extended cover film shall exist of 400 to 560 mm including leader area. 8 - 2 - 3 ?`??K???`? 30 50mm ?`?`?``` N?? leader area at t he tip of the cover film shall be attached to the side o f reel with adhesive tape (30 to 50mm). 8 - 3 1 ` 3 ,000 {?? a reel shall contain 3 ,000pcs of co m ponents. 8 - 4 `???N???F@????????? part n umber, c ustomer's p art n umber, q uantity and outgoing i nspection number shall be shown in th e label on each reel. 2.00.5 180 g mm 160 /min. ?`` `` ??? ? `?` ? trailer empty components empty leader cover film in mm 160190 400560mm 9.0 +1.0 0 13.00.2 400 to 560mm 160 to 190 13.01.0 0 -1.5
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 6 / 19 9. y measuring method 9 - 1 k? : 1 ?y?y??? u ?? oscillating frequency : see figure 1. the measurement circuit is made by murata. 9 - 2 ? : ??????? 4294 keysight u ??? y ?y?R 0.175vrms ? equivalent circuit value : vector impedance analyzer 4294( keysight ) or e quivalent is used for the measurement . a pplied volt- age is 0.175vrms . 9 - 3 y : ? +255 ? 20 85%r.h. ??y?B?? measuring condition : standard conditions for the measurem ent shall be +255c and 20 to 85%r.h .. ic:1/6 tc74hcu04 x2 (toshiba) vdd:+5.0 0.1v rf:1m rd:220 ` 1 k?y figure 1. measurement circuit of oscillating frequency ???`? (to frequency counter) output vdd c1 c2 rf (1) (3) (2) ceralock rd 5pf 1m r
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 7 / 19 10. C physical characteristics ? ? Y ?Y? n u ? ? Y g ? ? B 2 ) ?rg n? ? ? y??Y ??? 2 ) for 6m s in the directions of 6 sides. testing procedure is in accordance with aec - q200 rev d. ? u??Y??g??B?? 2 ) ? rg y??Y ??? 2 ) with 10 to 2000hz band of vibration frequency to each of 3 perpendicular direction for 4 hours. testing procedure i s in accordance with aec - q200 rev d . ? B u? ? ?Y??g? ? ??? ???R g???Y ??? ? 20 50 part pcb r340 45 45 load deflection stick 5 supporter 1 off-center ?R ?R 1 ??` ? 5 ?? 1
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 8 / 19 10 - 4 ?? ?`? u?g??B??`?`? ? ?? ??? rg ? y??Y ?? ? ?? ??? g ? rg y? ???O???? ??Y ?? ? ?? Q?? ?? ??? ? u?? ? ?? g?? rg y??Y ?? ? ? ? ? oU ? ???? ? ? rg`???????? `? ? 5 ?? 0.5 g??Y ?? ? ? ??
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 9 / 19 10 - 6 ? ? ? ? ?? g???Y ??? ? ? ? ? ??? Q?? ??
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 10 / 19 11. ? environmental characteristics ? ? Y ?Y? u??Y??g??B?? 2 rg? ?? rg ?? y??Y ??? ? u? ?Y ?g??B?? 2 rg? ? rg y ? Y ?? ? ? ?? u??Y??g??B?? ? o?? ??? rg? ?? rg ?? y??Y ??? ?
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 11 / 19 11 - 4 n u??Y??g??B?? 2 g?? 2 ?? g?? ? ? ? r g?? y???Y ??? ? ? u??Y??g??B?? 2 ??? rg ? rg ?? y ?Y ??? ? ? ?????R ?? ? ?????? lg?? y??Y ?? ? e=500v , c=150pf , r=2.0k,direct contact =150pf , r=2.0k,direct contact ?
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 12 / 19 1 table 1. ? ?Y? k? ??? | ? 2 ?Y figure 2. test board for bending strength test | ? 3 ?Y figure 3. t est board g mm in mm g mm in mm 100 40 4.5 2.8 1.9 1.2 0.4 12 8
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 13 / 19 2 table 2 ? washability ?? ? ??? ? ?????? ???????? ????? u??? ?? u?? - ??? Q ??? Q ? (1) ? ? ???? ? z? n? ? ??? n? ? ????? ? ? ? ??? Q?? ?`?? ? R`?` g?? u?? +90 r +60 ???n? t=30 ??? in case the component at +90c immerses into cleaning solvent at +60c, then t=30c. ? notice: 1 ?Lrg?????????` 10 ?? total washing time should be within 10 minutes. 2 g ??B????k????u? please insure the component is thoroughly evaluated in your application circuit. 3 c??????????????k? ?????? the component may be damaged if it is washed with chlorine, petroleum or alkali cleaning solvent.
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 14 / 19 12. ? cautions 1 2 - 1 ?? limitation of applications u?????`??b????????? m???????????????????Bj ?C C ?C kC ?C ??C ( ??? ) ???C ?C IC ?C??C please contact us before using our products for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third partys life, body or prope rty. aircraft equipment aerospace equipment undersea equipment power plant control equipment medical equipment transportation equipment (vehicles, trains, ships, etc.) traffic signal equipment disaster prevention / crime prevention equipment data - processing equipment applications of similar complexity and/or with reliability requirements to the applications listed in the above 1 2 - 2 ?`?`?C? fail - safe u???????????m??`? `?C??? be sure to provide an appropriat e fail - safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product. !
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 15 / 19 13. ??? caution for use 1 3 - 1 ^ n???????????Q? ?? the component may be damaged if exces s mechanical stress is a p plied. 1 3 - 2 ????k??k????k????k??k? ??_J?? irregular or stop oscillation may occur under unmatched circuit conditions. 1 3 - 3 u??JR??QCg?C????g????^ n??u??p? ????g?C??u_J?? ???C??g?C??g????????? ?? the component is recommended with placement machines with employ optical placement capabilities. the component might be resulted in damage by excessive mechanical force. p lease make sure that you have evaluated by using placement machines before going into mass production. do not use placement machines which utilize mechanical positioning. please contact murata for details beforehand. 1 3 - 4 ? soldering u???`??g? ? ?`????????? ? ???u????? u? ????? ??? ?u???^?????R??u??O?p ????? please mount component on a circuit board by re - flow soldering . flow soldering is not acceptable . be compelled to mount component by using soldering iron, please do not directly touch the component with soldering iron. the terminals of component or electrical characteristics may be damaged if excess thermal stress is applied. 1 3 - 4 - 1 ?X ???? recommendable flux and so lder ?? ????????????? ? M???? `?T? ??
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 16 / 19 1 3 - 4 - 2 ?X? recommendable soldering profile ? ?? ? ?`? ????y? * temperature shall be measured on the surface of component . 1 3 - 4 - 3 ?X ? recommendable soldering with iron ??? Y ??? Y ??? ?rg ? ? gradual cooling ?? heating pre - heating ?` peak (1 5 0 - 1 8 0c) 60 120s (2 2 0c /min. ) 30 60s temperature (c) 1 5 0 180 2 2 0 2 45 2 60
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 17 / 19 1 3 - 4 - 4 ?? solder volume ????????????? ?p?? please keep the solder volume less than the height of the substrate. when exceeding the substrate, the damage of adhesive for sealing between the metal cap and the substrate may occur. 1 3 - 5 ??????????_J?? conformal coating o f the component is acceptable. however, the resin material, curing temperature, and other process conditions should be evaluated to confirm stable electrical characteristics are maintained. 1 3 - 6 g????u???? do not reuse removed component f rom a circuit board after soldering. ?? ?
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 18 / 19 14. u??? notice on product storage 1 4 - 1 ? - 10 +40 ? 15 85% ?????? please store the products in room where the temperature / humidity is stable. and avoid such places where there are large temperatur e changes. please store the products under the following conditions : temperature : - 10 to +40 c humidity : 15 to 85% r.h. 1 4 - 2 u??_y_?B??{ 6 g?{ 6 ??? 6 ????????_J?? expire date (shelf life) of the products is 6 months after delivery under the conditions of a sealed and an unopened package. please use the products within 6 months after delivery. if you store the products for a long time ( more than 6months ), use carefully because the products may be degraded in the solder - ability and/or rusty. please confirm solder - ability and characteristics for the products regularly. 1 4 - 3 ???cC???????????? ??????????? please do not store the products in a chemical atmosphere (ac ids, alkali, bases, organic gas, sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solder - ability due to the storage in a chemical atmosphere. 1 4 - 4 ??m???????????? please do not put the p roducts directly on the floor without anything under them to avoid damp places and/or dusty places. 1 4 - 5 ??????????? please do not store the products in the places under direct sunlight, heat and vibration . 1 4 - 6 _y_?L?????r?? ?????? _y_???? please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solder - ability due to storage under the poor condition. 1 4 - 7 u?? ?u??????????????B? ???Q? please do not drop the products to avoid cracking of ceramic element.
document no. jgc42 - 8853a ? u murata manufacturing co.,ltd. p. 19 / 19 15. note: 1 5 - 1 ??H???Fu??g???B??u please make sure that your product has been evaluated in view of your specifications with our product being mounted to your product. 1 5 - 2 u? u? ??d????? you are requested not to use our product d e viating from this product specification. !

▲Up To Search▲

Price & Availability of CSTNE16M0V53C000B0

	To Download CSTNE16M0V53C000B0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .